Example Tundra Maintenance Schedule
Every 5,000 Miles
- Rotate tires
- Inspect and adjust all fluid levels
- Inspect wiper blades
- Check installation of driver's floor mat
- Visually inspect brake linings/drums and brake pads/discs
Every 10,000 Miles
- 5,000-mile maintenance tasks
- Replace engine oil and oil filter
Every 15,000 Miles
- 5,000-mile maintenance tasks
- Inspect ball joints and dust covers
- Inspect brake lines and hoses
- Inspect drive shaft boots (4WD)
- Inspect engine coolant and intercooler coolant
- Inspect exhaust pipes and mountings
- Inspect radiator and condenser
Every 30,000 Miles
- 15,000-mile maintenance tasks
- Replace cabin air filter
- Replace engine air filter
- Inspect automatic transmission fluid cooler hoses and connections
- Inspect automatic transmission for signs of leakage
- Inspect fuel tank cap gasket, fuel lines, and connections
- Inspect transfer case oil (4WD)
- Inspect front and rear differential oil
Every 40,000 Miles
- 10,000-mile maintenance tasks
- Replace spark plugs
Every 60,000 Miles
- 30,000-mile maintenance tasks
- Inspect drive belts
Every 100,000 Miles
- 10,000-mile maintenance tasks
- Replace engine coolant (Initial replacement, then every 50,000 miles)
- Replace intercooler coolant (Initial replacement, then every 50,000 miles)